Hanshin Machinery GRH 3 series, Руководство пользователя

Страница: 50 / 79

50 / Hanshin
5. Operations
Place the cursor on [T01] and press [ENT] button. Then, the
left screen appears.
Place the cursor on 1 05, press [ENT] button, change the
data by using [
] buttons and press [ENT] button,
completing the data change. Then, if pressing [ESC] button,
the screen moves to the higher menu.
Y-D switchover
time setting
If placing the cursor on [T02] and pressing [ENT] button, the
left screen appears.
Place the cursor on 1 10, press [ENT] button, change the
data by using [
] buttons and press [ENT] button,
completing the data change. If pressing [ESC] button, the
screen moves to the higher menu.
Caution!
Do not set T02 shorter than 5 mins.
Frequent starts may cause the trouble in the main motor.
Auto stop
time setting
The compressor stops if it operates under
no load longer than the pre-defined time.
Place the cursor on [PARAMETER] and press [ENT]
button.
Place the cursor on SET CLOCK and press [ENT] button.
Place the cursor on an item to change by using [ ],
[ ] buttons and press [ENT] button to change time,
date and year.
SET CLOCK
Time, date, year
3. Micom time setting
When the compressor is released, the time is set on Micom, based on the standard time of the Republic of
Korea. Since schedule operation starts in the pre-defined time, make sure to set the time accurately. A user
does not have to re-set the time except a special case and if the time should be inevitably re-set, set the time
according to the following steps.
Second
Minute Second
HH: hour
MM: minute
DD: date
MM: month
YEAR: year