Operation Page EN-15
(13)
(27)
red
yellow
1. Pull the mains cord (27) out
by the mains plug (13) until
the
yellow
marking is visible
on the mains cord. If the
red
marking is visible, the mains
cord has been pulled out
too far. Allow the mains cord
to retract slightly (see sec-
tion "Finishing vacuuming“ on
page EN-16).
2. Insert the mains plug (13) into
a properly installed socket.
(3)
3. Use your foot to operate the
on/off foot switch (3), to switch
the appliance on.
4. To vacuum, push and pull the
nozzle across the surface your
are vacuuming. Rotate the
telescopic tube handle (16)
slightly to reach corners more
effectively. This positions the
nozzle diagonally.
In rare cases this can make
a whistling noise initially.
This is not a malfunction
and stops after a while.
Содержание VCM38A13M-A-70
Страница 64: ......
