Built-in oven with digital timer 65M90E0-E11A99G
GB-37
General
2. Push the hooks into the holes
34
provided in
the side walls.
3. Now tighten the screws
33
again.
Replacing oven lightbulbs
For oven lighting, you need a heat-resistant ov-
en bulb: type 230 V~, 25 W, G9, T 300 C.
WARNING
Risk of electric shock!
Improper replacing of the oven light
bulb may cause electric shock which
can lead to serious injury or even
death.
• Before replacing the oven bulb, be
sure to switch off the circuit breaker
or unscrew fuses.
Risk of burns!
The cooking compartment can re-
main hot a long time after it has been
switched off. As a result, there is a
risk of being burnt when touching the
cooking compartment walls or heat-
ing unit.
• Only change the oven light bulb
when the oven has cooled off com-
pletely.
1. Switch off the circuit breakers or unscrew
fuses.
2. Place a soft cloth in the cooled cooking com-
partment in the event that the glass cover
falls or the bulb falls off.
3. Unscrew the glass cover anticlockwise and
remove it.
4. Carefully pull the defective bulb out of the
socket and replace it with a new one of the
same type.
5. Insert the glass cover back into the opening
and screw it back on clockwise.
6. Remove the cloth from the cooking compart-
ment and switch it on again.
7. Set the clock.
