GE Appliances
JKP20BF/CF/WF – GE 27" Built-In Single Oven
Specification Created 7/02
320430
Installation Information:
Before installing, consult
installation instructions packed with product for current
dimensional data.
27" Built-In Single Oven Dimensions (in inches)
2" x 4"
or equiv.
runners
B MIN.
C MIN.
Conduit 4 8-1/2" long
6015 Built-in Single Oven
(Pub. 1-G003 pg. 107) April 28, 1993
32-1/2
D
10
A
Allow 3/4"
for overlap
over all edges
of cutout
Locate
junction box
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
Minimum
cutout location
from floor
(Minimum 15-5/8"
from floor when
installed below built-in
microwave oven)
E
G
F
20
Note:
Cabinets installed adjacent to wall ovens must have an adhesion spec
of at least a 194°F temperature rating.
Note:
For 27" built-in single ovens, if marks, blemishes or the cutout opening
is visible above the installed oven, it may be necessary to add wood shims
under the runners and front trim until the marks or openings are covered.
Note: These ovens are not approved for stackable or side-by-side
installations.
Note: These ovens can be installed side-by-side with no less than
30" distance between center-to-center of each oven.
Cabinet
27"
A – Cabinet Width Required
27" min.
B – Minimum Cabinet Depth
23-5/8"
C – Opening Width
25" min. - 25-1/4 max.
D – Opening Height
27-5/8" min. - 28-1/8 max.
Oven
E – Overall Depth
23-5/8"
w/o trim
28-1/4"
F – Overall Height with trim
29"
G – Overall Width
26-5/8"
C�
L�
Suitable�
bracing �
to support�
runners
18" �
Over centerline�
of cabinet
2" x 4" or�
equivalent�
runners
(Must support 275 lbs.)
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile
™
or
GE appliance questions, visit our website at
ge.com or call GE Answer Center
®
service,
800.626.2000.
Electric wall ovens are not approved for installation with a plug
and receptacle. They must be hard wired in accordance with
installation instructions.
KW Rating
240V
3.4
208V
2.6
Breaker Size
240V
20 Amps
208V
20 Amps
