background image

2

Dear Customer,
Thank you for choosing a Hanna Instruments product.
Please read this instruction manual carefully before using the meter. 
This manual will provide you with the necessary information for  correct 
use of the instrument, as well as a precise idea of its versatility. If you 
need additional technical information, do not hesitate to e-mail us at 
[email protected].

WARRANTY ..................................................................................2
PRELIMINARY EXAMINATION .........................................................3
GENERAL DESCRIPTION .................................................................3
FUNCTIONAL DESCRIPTION ............................................................4
SPECIFICATIONS ...........................................................................5
OPERATIONAL GUIDE ....................................................................6
pH CALIBRATION ..........................................................................8
pH VALUES AT VARIOUS TEMPERATURES .....................................10
EC/TDS CALIBRATION ..................................................................11
EC/TDS CONVERSION FACTOR ......................................................11
BATTERY REPLACEMENT ..............................................................12
PROBE MAINTENANCE ................................................................13
ACCESSORIES .............................................................................14

HI9811-5

 is guaranteed for two years against defects in workmanship 

and materials when used for their intended purpose and maintained 
according to instructions. Electrodes and probes are guaranteed for six 
months. This warranty is limited to repair or replacement free of charge.
Damage due to accidents, misuse, tampering or lack of prescribed 
maintenance is not covered.
If service is required, contact your local Hanna Instruments Office. 
If under warranty, report the model number, date of purchase, serial 
number and the nature of the problem. If the repair is not covered by the 
warranty, you will be notified of the charges incurred. If the instrument 
is to be returned to Hanna Instruments, first obtain a Returned Goods 
Authorization number from the Technical Service department and then 
send it with shipping costs prepaid. When shipping any instrument, 
make sure it is properly packed for complete protection.

WARRANTY

TABLE OF CONTENTS

Содержание HI 9811-5

















Отзывы: