33
HI 731326
Small screwdrivers, length 90 mm, for calibration
purposes (20 pcs) (for HI 9033, HI 9034 and HI 9130
only)
HI 76301W
4-ring probe without temperature sensor, for Manual
Temperature Compensation measurements with
HI 933100 and HI 9635
HI 76302W
4-ring probe with temperature sensor, for Automatic
Temperature Compensation measurements
HI 710031
Hard carrying case
MANCONWPR2
Instruction Manual
WARRANTY
WARRANTY
WARRANTY
WARRANTY
WARRANTY
All Hanna Instruments
meters are warranted for two years
against defects in workmanship and materials when used for their
intended purpose and maintained according to instructions.
The
electrodes and the probes are warranted for a period of six
months.
This warranty is limited to repair or replacement free of
charge.
Damages due to accident, misuse, tampering or lack of prescribed
maintenance are not covered.
If service is required, contact the dealer from whom you purchased the
instrument. If under warranty, report the model number, date of
purchase, serial number and the nature of the failure. If the repair
is not covered by the warranty, you will be notified of the charges
incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization number from the Cus-
tomer Service department and then send it with shipping costs
prepaid. When shipping any instrument, make sure it is properly
packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty
card within 14 days from the date of purchase.
All rights are reserved. Reproduction in whole or in part is prohibited
without the written consent of the copyright owner,
Hanna Instruments Inc., 584 Park East Drive, Woonsocket, Rhode
Island, 02895 , USA.
Hanna Instruments reserves the right to modify the design, construc-
tion and appearance of its products without advance notice.
www.
.com
1.800.561.8187
