Hanlong Unicorn 60X0, Руководство пользователя

Страница: 19 / 25

Hanlong Technology Co., Ltd Unicorn 60x0 User Manual Page 19 of 25
Firmware 1.0.0.29 Last Updated 8/2010
Explanation of example rule (reading from left to right):
^1900x. - prevents dialing any number started with 1900
<=1617>[2-9]xxxxxx - allows dialing to local area code (617)
numbers by dialing 7 numbers and 1617 area code will be
added automatically
1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada
Number with 11 digits length
011[2-9]x. - allows international calls starting with 011
[3469]11 - allow dialing special and emergency numbers
311, 411, 611 and 911
Note: In some cases user wishes to dial strings such as
*123 to activate voice mail or other application provided by
service provider. In this case * should be predefined
inside dial plan feature and the Dial Plan should be: { [x*]+ }.
More information can be availabled at Dail Plan Notes.
Send Anonymous
If this parameter is set to “Yes”, the “From” header in
outgoing INVITE message will be set to anonymous,
essentially blocking the Caller ID from displaying.
Anonymous Call
Rejection
Default is No . If set to Yes, incoming calls with anonymous
Caller ID will be rejected with 486 Busy message.
Session Expiration
The session timer extension enables SIP sessions to be
periodically “refreshed” via a re-INVITE request.
Once the session interval expires, if there is no refresh via a
re-INVITE message, the session will be terminated.
Session Expiration is the time (in seconds) at which the
session is considered timed out, if no successful session
refresh transaction occurs beforehand. The default value is
180 seconds. Default is 180 seconds.
Min-SE
The minimum session expiration (in seconds). Default is 90
seconds.
Caller Request Timer
If selecting “ Yes ” the device will use session timer when it
makes outbound calls if remote party supports session
timer.
Default is NO.
Callee Request Timer
If selecting “ Yes ” the phone will use session timer when it
receives inbound calls with session timer request.
Default is NO .
Force Timer
If selecting “ Yes ” the device will use session timer even if
the remote party does not support this feature. Selecting
“ No ” will allow the device to enable session timer only when
the remote party support this feature.
To turn off Session Timer, select “ No ” for Caller Request
Timer, Callee Request Timer, and Force Timer.