Hangar 9 ULTRA aspire, Инструкция по эксплуатации

Страница: 30 / 40

Step 1. Check that all control functions move in the correct
direction. If not, use the respective reversing switch to correct
the direction.
Note: Mode II transmitter shown in diagrams
Step 2. Check that each clevis is securely snapped into posi-
tion. Be sure to use the clevis locking devices (small pieces of
tubing slipped over the clevis to hold the clevis closed and pre-
vent accidental opening in flight).
Step 3. Check that all servo horn screws are tight.
Step 4. Charge the transmitter and receiver batteries per the
instructions included with the radio system.
Step 5. Range check your radio system per the manufacturer’s
instructions.
30
Section 12: Pre-Flight Checks
Rudder
Rudder
Elevator
Elevator