34 Mini Maxx Installation Manual • www.hsperformance.com
the factory speedometer to read lower. The tire size can be adjusted from 25.5” to 45”. This option
can only be seen/changed after the Download is Installed to the vehicle. This option only takes a
few seconds to change and can be adjusted at any time from the Tire Size Calibration menu.
special functions / features
Your H&S tuning device has the capability of Enabling / Disabling factory vehicle features.
These features can be found in the Special Functions Menu. These features can only be seen/
changed after the Download is Installed to the vehicle. Below is a short description of each
feature:
TPMs:
Enable / Disable the Tire Pressure Monitoring System.
optical chirp on lock:
Enable / Disable the parking lights flashing when locking the vehicle.
Horn chirp on lock:
Enable / Disable the horn chirp when locking the vehicle.
set Head lamp Delay:
Enable / Disable the head lamp delay.
accessory Delay:
Enable / Disable the shut-off delay of your radio and accessory system after the key has
been turned off.
fog lights W/High:
Enable / Disable the fog lights staying on when high beams are being used.
Daytime lights:
Enable / Disable the daytime running lights.
seat Belt Minder:
Enable / Disable the chime for the drivers seat belt system. This feature will not dis-
able the seat belt light.
noTe:
If any special feature is already listed as Enabled but is not functioning correctly, you may need to disable the
feature, cycle the key, and re-enable the feature to make it function properly. If it still does not work, your vehicle may
not be equipped with the hardware required for the special feature. The previous selection will NOT be saved. If the
Special Functions/Features Menu is exited and returned into, it will not display your previous selection. This is normal
and the Enable/Disable function is still working properly.
stationary idle adjust:
The Stationary Idle Adjust Menu will allow you to adjust the idle speed of your vehicle while
in Park or Neutral using your H&S tuning device. Choose the desired idle speed and select
set
to set the idle speed to the chosen RPM. Idle speed can be adjusted from 700 RPM to
1500 RPM.
Keyed ignition source location
Although it is possible to manually power up the Mini Maxx without using a keyed ignition
source, it can sometimes create communication issues between the Mini Maxx and the
vehicles ECM. To eliminate these problems, we highly recommend tapping into a 12V keyed
ignition source to supply power to the Mini Maxx only when the key is in the ON position
and the vehicles ECM is online. Below you will find a commonly used 12V keyed ignition
source for your vehicle:
2010 - 2012 6.7L Dodge Cummins Specific Features Continued >>
Содержание MINI MAX
Страница 61: ...1 888 628 1730 Mini Maxx Installation Manual 61...
Страница 63: ......
Страница 64: ......