Handicare MINIVATOR 2000, Руководство по установке

Страница: 33 / 52

MINIVATOR 2000 INSTALLATION MANUAL 33
Appendix 2
Code: Meaning:
5
5 Bot stop – Right hand.
Top stop – Left hand.
Description:
End limits activated.
Telephone fault finding action:
Ask client to tap trunnion guards in case they are stuck.
If this does not correct the fault – send engineer.
On site fault finding action:
Check end limit circuit and trunnion guards.
Code: Meaning:
6
6 Bot pressure – Right hand.
Top pressure – Left hand.
Description:
Safety edge (down/up direction) activated
– footplate, underpan.
Telephone fault finding action:
Ask client to tap footplate edges. If this does not
correct the fault – send engineer.
On site fault finding action:
Check footplate bottom and downside and chassis
underpan.
Code: Meaning:
7
7 Low voltage.
Description:
Batteries approaching critical level.
Telephone fault finding action:
Ask client to drive lift to charge contacts – if ‘Okay’
code does not show send engineer. If the lift will not
drive – send engineer.
On site fault finding action:
Drive lift to charge contacts. Check charging circuit if
‘Okay’ code not displayed. If lift will not drive replace
batteries and check charging circuit.
Code: Meaning:
8
8 Up direction – Right hand
Down direction – Left hand.
Description:
Shows when toggle switch is activated in up/down
direction.
Telephone fault finding action:
None.
On site fault finding action:
None.
Code: Meaning:
9 Up direction – Left hand.
Down direction – Right hand.
Description:
Shows when toggle switch is activated in down/up
direction.
Telephone fault finding action:
None.
On site fault finding action:
None.
Code: Meaning:
b Switch active.
Description:
A switch is active at power on i.e. Toggle Up,
Toggle down, IR Up IR down or learn.
Telephone fault finding action:
Send engineer.
On site fault finding action:
A short circuit has occurred on toggle circuit
– check circuit.
Code: Meaning:
A
A Hinge open.
Description:
Telephone fault finding action:
None.
On site fault finding action:
None.
Code: Meaning:
C
C IR Address fail.
Description:
The IR Address (Dip switch) does not match.
Telephone fault finding action:
Send engineer.
On site fault finding action:
Re-program handsets.