Handicare MINIVATOR 2000, Руководство по установке

Страница: 27 / 52

MINIVATOR 2000 INSTALLATION MANUAL 27
Testing
d Depress the down button and keep it
depressed.
e Observe the function of the lift.
The lift should:
i
Beep whilst swivelling the seat
to the drive position.
ii Drive down the stairs.
2 Sit on the stairlift:
a Drive the lift down to the bottom of the stairs.
b Push the toggle switch in the up direction
and hold it in that position.
c Observe the function of the lift.
The lift should:
i Drive up the stairs.
ii Stop at the top of the track.
iii Beep whilst swivelling the seat
to the exit position.
d Push the toggle switch in the down
direction and hold it in that position.
e Observe the function of the lift.
The lift should:
i Beep whilst swivelling the seat
to the drive position.
ii Drive down the stairs.
Power hinge track only
1 Using the handset:
a Drive the lift to the top of the stairs.
b
Depress the down button and keep it
depressed.
c Observe the function of the lift.
The lift should:
i Drive down the stairs.
ii Stop at the park position.
iii
Beep whilst lowering the hinge.
iv After a short pause continue to the
bottom of the track.
d Depress the up button and keep it
depressed.
e Observe the function of the lift.
The lift should:
i
Drive up the stairs.
ii Stop at the park position.
iii Beep whilst raising the hinge.
iv After a short pause continue to the
top of the track.
2 Sit on the stairlift:
a Drive the lift to the top of the stairs.
b
Push the toggle switch in the down direction
and hold it in that position.
c Observe the function of the lift.
The lift should:
i Drive down the stairs.
ii Stop at the park position.
iii
Beep whilst lowering the hinge.
iv After a short pause continue to the
bottom of the track.
d Push the toggle switch in the up direction
and hold it in that position.
e Observe the function of the lift.
The lift should:
i Drive up the stairs.
ii Stop at the park position.
iii Beep whilst raising the hinge.
iv After a short pause continue to the
top of the track.
3
Turn off the power supply to the charge
contacts.
4 Repeat steps 1 and 2 above.
5 Turn the power supply back on.