35
7.4
Workstation Communication
To synchronize, Windows Mobile Device Center must be installed and configured for the appropriate
communication type on the host workstation and the Terminal. Terminals ship with the software already
installed. If WMDC has already been installed on the host workstation, you just need to connect the Terminal
to the host workstation to initiate the communication.
NOTE: You can download the most current version of Windows Mobile Device Center from
www.microsoft.com
.
WARNING: Your terminal is designed to be connected to the host workstation using Handheld peripherals, power
cables, and power adapters. Use of any non-Handheld peripherals, cables, or power adapters may cause damage
not covered by the warranty.
7.5
Communication Type
The TERMINAL supports the following type of communication via Windows Mobile Device Center through its
I/O connector on the bottom panel. The USB cable and hardware peripherals allow the Terminal to
communicate with a workstation through a USB port or to a network through a USB hub. The Terminal
supports high-speed USB communication (USB 2.0); maximum data transfer rate is 480 Mbps.
7.6
Hardware Requirements for Setup
7.7
Software Requirements for Communication
To sync successfully, Windows Mobile Device Center must be configured for the same communication type
on both the host workstation and the Terminal. WMDC must be set up on your workstation before you initiate
synchronization from the terminal for the first time.
7.8
Setting Up the Host Workstation
Verify that Windows Mobile Device Center is configured to use the appropriate communication type by
selecting
File
->
Settings -> Connections -> USB to PC
.
7.9
Communicating with the Terminal
After setting up both the workstation and the terminal, connection should be automatic.
1. Connect the Terminal to the workstation using a USB cable.
2. The Terminal automatically opens Windows Mobile Device Center to establish a connection.
7.10
Synchronizing with the Host Workstation
After setup, synchronization begins automatically whenever the terminal connects to host workstation with
WMDC installed.
Содержание Nautiz X8
Страница 1: ...NAUTIZ X8 MANUAL ...
