20
STYLUS AND TETHER
The Terminal is shipped with a stylus that stores in a loop on the handstrap
using it; see
Using the Stylus in paragraph 3.8.
4.8
Battery Cavity Layout
4.9
Installing Memory Cards
The TERMINAL supports Micro Secure Digital (SD) memory cards up to 32GB.
Sandisk, Kingstone and ATP
micro SD are recommended
To access the Micro SD card slot and insert the card, proceed as follows:
1. Press the
Power
key to put the terminal in Suspend Mode; see Suspend Mode on paragraph 4.23.
2. Remove the battery door on the back of the unit.
3. Remove the battery.
4. Insert the SD card with the label facing upward.
NOTE: To remove an installed SD card, tap on the edge lightly to unlock the card; the card will pop out just enough for you
to grab its edge and pull it out.
5. Replace battery and battery door.
6. Tap the
Power
key to resume operation.
7. To verify that the operating system recognizes the new memory card, open Windows Explorer and
navigate to My Device
\
Storage Card.
WARNING: Follow proper ESD precautions to avoid damaging the SD. Proper ESD precautions include, but are not
limited to, working on an ESD mat and ensuring that the operator is properly grounded.
Do not force the card. If you feel resistance, remove the card, check the orientation, and reinsert it.
Do not use the Micro SD card slot for any other accessories.
It is highly recommended to lock the card holder even if the card is not present.
Battery Pack Retainer
Micro SD slot
IMEI number (for WWAN)
Содержание Nautiz X8
Страница 1: ...NAUTIZ X8 MANUAL ...
