HandHeld Nautiz X8, Руководство пользователя

Страница: 38 / 40

38
7.15 WLAN (802.11 b/g/n Radio)
TERMINAL has a 2.4 GHz 802.11 b/g/n WLAN (Wireless Local Area Network) radio that uses Direct
Sequence Spread Spectrum (DSSS) technology. The radio is interoperable with other 802.11b/g/n, Wi-Fi
compliant products including access points (APs), workstations via PC card adapters, and other wireless
portable devices.
By default, the 802.11b/g/n radio is powered-
press the vertical arrow (bottom right corner of screen) and select
Turn Wireless LAN On . The
enable/disable state of the radio will survive subsequent soft and hard resets. The next step is to configure
the connection parameters of the radio to connect to a wireless network.
CONFIGURING THE WLAN RADIO
The WLAN radio is configured in the Handheld WLAN Client, which you access by the program icon in the
command bar.
7.16 Adding Programs from the Internet
When you have established a network connection (whether via Wireless LAN, Bluetooth, or Windows Mobile
Device Center), you can access the Internet and download additional software programs.
When selecting programs, verify that the program and version of the program are designed for Windows
Embedded Handheld 6.5.3 Pro
Start -> Settings -> System -> General tab
. Make a note of the information in the Processor field.
file, or several versions of files for different device types and processors.
2. Select the program version that matches your Terminal and processor.
3. Read any installation instructions, Read Me files, or documentation that comes with the program. Many
programs provide special installation instructions.
4. Download the program to the terminal directly from the Internet. You would normally store the program in
the
Program Files
folder unless another location is required by the program.
5. On the terminal, the installer file; e.g., the *.exe file.
6. The installation wizard for the program begins.
7. Follow the directions on the screen to complete installation.