GB
52
• The motor and pump on the machine are installed in an impact resistant casing� The machine has an
ergonomic spray gun and spray head, which comply with the requirements
in the applicable regulations�
• Never modify the spray head or nozzles in any way, or cover them over�
• The machine is intended to be used with water at a maximum temperature of 60°C� Higher
temperatures can damage the machine�
• Only use water that is free from sand, chemicals and other impurities� Impurities can reduce
functionality and shorten the useful life of the machine�
USE
• Open the water cock fully�
Release the safety catch for the trigger and press
the trigger for a few seconds to vent and relieve the
pressure in the hose�
Keep the trigger pressed and press the power
switch to start the motor�
Safety catch
Trigger
• Always keep the trigger pressed when starting the motor�
• Apply chemicals on dry surfaces with a broad spray pattern� Work from below and up on vertical
surfaces� Allow it to act for a few minutes, but do not let it dry�
• Make sure that there is no water running on surfaces that should not be wet�
NOTE:
The motor only works when the trigger is pressed�