![background image](http://html1.mh-extra.com/html/hampton-bay/campbell-ii/campbell-ii_use-and-care-manual_4078200009.webp)
9
HAMPTONBAY.COM
Please contact 1-877-527-0313 for further assistance.
Assembly - Hanging the Fan (continued)
Making the electrical connections
□
Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation) to
the green ground lead(s) (KK) of the fan. When using standard
ceiling mounting, there are two green grounding leads; one
from the ceiling mounting bracket and one from the ball/
downrod assembly. When using close to ceiling mounting,
there is only one green grounding lead from the ceiling
mounting bracket since the ball/downrod assembly is not
used.
□
Connect the fan motor white wire (NN) to the supply white
(neutral) wire (NN) using a wire connecting nut (BB).
□
Connect the fan light supply (blue) wire (LL) and the fan motor
black wire (MM) to the supply black (hot) wire (MM) using a
wire connecting nut (BB).
□
After connecting the wires, spread them apart so that the
green (KK) and white wires (NN) are on one side of the outlet
box (OO) and the black wire (MM) is on the other side.
□
Turn the plastic wire connectors (BB) upward, and carefully
push the wiring into the outlet box (OO).
3
IMPORTANT:
Use the plastic wire connectors (BB) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
LL
MM
NN KK
NN
MM
LL
MM
NN
NN
OO
WARNING:
Each wire nut supplied with this fan is designed to
accept up to one 12-gauge house wire and two wires from the
fan. If you have larger than 12-gauge house wiring or more
than one house wire to connect to the fan wiring, consult an
electrician for the proper size wire nuts to use.