11
HAMPTONBAY.COM
Para obtener asistencia, llama al 1-877-527-0313.
Ensamblaje - Cómo instalar las lámparas
Cómo instalar el ensamblaje del
soporte del kit de luces
Cómo instalar las bombillas y el
tazón de vidrio
1
2
□
Quita los tres tornillos (RR) en la cubierta de la caja del
interruptor del ensamblaje del soporte del kit de luces (E).
□
Conecta los cables del ensamblaje del soporte del kit de luces
(E) a los cables de la caja del interruptor del ensamblaje del
motor del ventilador (D), usando los enchufes con adaptadores
moldeados (azul con negro, blanco con blanco). Coloca con
cuidado todos los cables y empalmes dentro de la caja del
interruptor.
□
Alinea los tres orificios de la cubierta de la caja del interruptor
del ensamblaje del soporte del kit de luces (E) con los tres
orificios en la caja del interruptor del ensamblaje del motor del
ventilador (D). Asegúrate de que la muesca en la cubierta de la
caja del interruptor del soporte del kit de luces (E) permita que el
interruptor de reversa en la caja del interruptor del ensamblaje
del motor del ventilador (D) se mueva libremente. Coloca el
ensamblaje del soporte del kit de luces (E) y vuelve a colocar los
tres tornillos (RR) que fueron retirados en el primer paso para
asegurar el ensamblaje del soporte del kit de luces (E).
□
Retira el remate y la cubierta inferior de la boquilla roscada del
ensamblaje del soporte del kit de luces (E).
□
Con la electricidad apagada, instala las dos bombillas
incandescentes (I), enroscándolas en los portabombillas.
□
Coloca el tazón de vidrio (H), vuelve a colocar la cubierta inferior
sobre la boquilla roscada y pasa la cadena del interruptor del
ventilador a través del orificio lateral en la cubierta inferior.
□
Vuelve a colocar el remate sobre la boquilla roscada y pasa
la cadena del interruptor de las luces a través del orificio del
remate y ajústalo bien.
□
Instala las extensiones de las cadenas de interruptores (II)
incluidas, tanto para la del interruptor de luces como para la
del ventilador.
PRECAUCIÓN:
Para disminuir el riesgo de descarga
eléctrica, desconecta el circuito de energía del ventilador
antes de instalar la lámpara.
PRECAUCIÓN:
Asegúrate de que la corriente esté cortada
antes de montar o retirar el tazón de vidrio.
NOTA:
Marca la posición del interruptor deslizante del ventilador.
Este es el interruptor utilizado para cambiar la dirección de la
rotación del ventilador. Para más información sobre la operación
del interruptor, consulta
Cómo usar el ventilador
en la página 12.
ADVERTENCIA:
Colocar bombillas de vataje incorrecto en el kit
de luces hará que las luces se apaguen hasta que se instale
las bombillas adecuadas. Apaga el kit de luces, reemplaza las
bombillas con otras de vataje correcto y vuelve a encenderlo.
ADVERTENCIA:
Espera que el tazón de vidrio se enfríe
completamente antes de retirarlo.
D
E
RR
I
D
E
H
II
PRECAUCIÓN:
No aprietes demasiado la tuerca hexagonal
debido a que podría romper el vidrio.