12
Enciende la electricidad y verifica el funcionamiento del ventilador.
La cadena del interruptor controla las velocidades del ventilador de la
siguiente manera:
1 vez: Alta, 2 veces: Media, 3: Baja y 4: Apagado.
Las configuraciones de velocidad apropiadas para clima cálido o frío
dependen de factores como el tamaño de la habitación, la altura del
techo y la cantidad de ventiladores.
Los controles del interruptor deslizante cambian la dirección de las aspas:
hacia delante (interruptor para abajo) o reversa (interruptor para arriba).
Clima cálido - (Hacia adelante) Un flujo de aire descendente crea un
efecto de enfriamiento. Esto te permite fijar tu aire acondicionado en una
configuración más alta sin afectar tu comodidad.
Clima frío - (Reversa) Un flujo de aire hacia arriba mueve el aire cálido lejos
del techo. Esto te permite fijar tu unidad de calefacción en una configuración
más baja sin afectar tu comodidad.
NOTA:
Espera a que se detenga el ventilador antes de invertir la
dirección de giro de las aspas.
PP
D
RR
HH
Ensamblaje - Ensamblar el ventilador sin el kit de luces
Funcionamiento
CÓMO USAR EL VENTILADOR
Cómo ensamblar el ventilador sin
el kit de luces
1
□
Con el fin de utilizar el ventilador sin el kit de luces, retira la
cubierta de la caja del interruptor (PP) ubicado en la parte superior
del soporte del kit de luces (E), retirando la tuerca hexagonal del
centro dentro de la cubierta de la caja del interruptor (PP) y luego,
desenrosca la cubierta de la caja del interruptor (PP) de la boquilla
roscada sobre el ensamblaje del soporte del kit de luces (E).
□
Empuja el tapón plástico (HH) dentro del orificio central de la
cubierta de la caja del interruptor (PP).
□
Quita los tres tornillos (RR) en la cubierta de la caja del interruptor
(PP).
□
Alinea los tres orificios de la cubierta de la caja del interruptor (PP)
con los tres orificios en la caja del interruptor del ensamblaje del
motor del ventilador (D). Asegúrate de que la muesca en la cubierta
de la caja del interruptor (PP) permita que el interruptor de reversa
en la caja del interruptor del ensamblaje del motor del ventilador
(D) se mueva libremente.
□
Vuelve a colocar los tres tornillos (RR) que fueron retirados en el
primer paso para asegurar la cubierta de la caja del interruptor
(PP).