7
HAMPTONBAY.COM
Para obtener asistencia, llama al 1-877-527-0313.
Ensamblaje – Montaje estándar en techo
Disposición de los cables
Cómo ensamblar el ventilador
Preparación para montaje estándar
□
Afloja, sin quitar, los tornillos (JJ) del collarín ubicados en la
parte superior del ensamblaje del motor del ventilador (D).
□
Alinea los orificios en la parte inferior del ensamblaje del
tubo bajante/bola (B) con los orificios en el collarín de la
parte superior del ensamblaje del motor del ventilador (D).
□
Inserta con cuidado el pasador de soporte (CC) a través de
los orificios del collarín y del ensamblaje del tubo bajante/
bola (B). Ten cuidado de no forzar el pasador de soporte
(CC) contra el cableado dentro del ensamblaje del tubo
bajante/bola (B).
□
Inserta el pasador de cierre (DD) en el orificio cercano al
extremo del pasador de sujeción (CC) hasta que quede
encajado en su posición.
□
Vuelve a apretar los tornillos (JJ) del collarín ubicados en la
parte superior del ensamblaje del motor del ventilador (D).
□
Retira el soporte de montaje deslizante (A) de la cubierta (C)
aflojando los cuatro tornillos (SS) en la parte superior de la
cubierta (C).
□
Quita los dos tornillos sin ranura (SS) y afloja los tornillos
ranurados (SS). Esto te permitirá retirar el soporte de
montaje deslizante (A).
□
Asegúrate de que las ranuras estén en la parte
superior y pasa los cables existentes sobre la parte
superior del ensamblaje del motor del ventilador
(D) a través de la cubierta (C) y luego a través del
ensamblaje del tubo bajante/bola (B).
2
3
1
C
A
SS
C
B
D
C
B
D
CC
DD
JJ
ADVERTENCIA:
Si el pasador de cierre no se instala
correctamente (DD), es posible que el ventilador se afloje
y caiga.