12
Subject to change without notice
8.4 Test of the connection to the oscilloscope
For the test of the connection of the host (PC) to the Ethernet
interface of the oscilloscope, please go into the menu “Start“ and
select “Run“. Start the command interpreter by the input of the
instruction “cmd“ into the input fi eld. Complete the sequence
by the “Enter“ key or confi rm the input by clicking OK.
It opens an input window. After the input character you give to
confi rm the instruction “ping 192.168.10.10“ (in the represented
example the Ethernet interface of the oscilloscope has the IP
address 192.168.10.10) and confi rm the input with Enter.
If the Ethernet interface answers the example represented by
the oscilloscope to the “Ping“ instruction without errors as
in, the connection is correct. If the interface does not answer
attainable e.g. with an error message, no connection is present
or the connection is disturbed. In this case please examine all
network cables between oscilloscope and host (PC), as well
as the preset interface parameters of the Ethernet interface
with the oscilloscope and the Ethernet LAN interface with the
host (PC). If the connection over further network elements e.g.
switches, routers, network servers, etc. is used, examine if
necessary these further connections, as well as the presets of
the appropriate network elements.
9. Application
In combination with HMLab 1.0 or higher, the interface HO730
can be used via Ethernet as well as USB. The HMLab settings
have to correspond with the interface settings of the oscil-
loscope. With HMLab an oscilloscope or several oscilloscopes
can be operated at the same time, if these are connected by a
common LAN network. Likewise an oscilloscope or also several
oscilloscopes can be operated at the same time, if they are atta-
ched over USB or the LAN-/WAN networks are distributed over
several LAN-/WAN networks among themselves with switches
and/or routers (e.g. over the Internet) connected.
The interface HO730 has also a Web server, which can be used
with a Web browser (e.g. Internet Explorer, …). The following func-
tions are supported by the Web server (only in digital mode):
– Indicate the equipment data
– Selections of the Readout and save over Web browser func-
tion
– Control and inquiry with programming instructions (SCPI
instructions) over input mask
Indicate the equipment data
Selections of the Readout and save over Web browser func-
tion
E t h e r n e t c o n f i g u r a t i o n
