13
Subject to change without notice
Control and inquiry with programming instructions (SCPI
instructions) over input mask
If the present HMLab version is below 1.0 the current version
can be found in the Internet (www.hameg.com) for downloading
and updating your PC. The path of the software is: Products
>
Oscilloscopes
>
(oscilloscope type)
>
Software/Firmware
(below the oscilloscope picture)
>
Software/Firmware (below
the oscilloscope picture)
>
HMLab.zip.
The programming commands list will be provided in the Internet
under www.hameg.com.
Mainhausen, Germany
August 2006
A p p l i c a t i o n
