Subject to change without notice
15
Synchronous output (short-circuit proof)
Output voltage:
2
V
pp
, sine wave
Internal resistance:
ca. 1 kΩ
Miscellaneous
The outputs can be isolated from the case ground by pressing
a key.
Power supply:
+5
V/120mA
(from mainframe)
+15 V/30 mA
–15
V/30
mA
(
∑
= 6.3W)
Operating temperature:
+10°C to +40°C
Max. relative humidity:
80 % (without condensation)
Dimensions (without 22-pole fl at plug):
(W x H x D)
135 x 68 x 228 mm
Weight:
approx.
0.65
kg
Operating modes
Sine
wave,
continuous,
amplitude-regulated
Frequency range:
5 Hz bis 50 kHz,
4
ranges
variable
control
10:1,
overlapping
ranges
Frequency drift
(Frequency control in center position)
15 min.
0.08% (50 kHz range)
8 hrs.
0.6% (50 kHz range)
15 min.
0.08% (in all other ranges)
8 hrs.
0.5% (in all other ranges)
Frequency display
3-digit, 7-segment LED display
Display accuracy:
±1
digit
Distortion factor
5 Hz - 20 Hz:
max.
0.03%
20 Hz -10 kHz:
max. 0.01%
1 kHz:
typ.
0.005%
10 kHz - 20 kHz:
max.
0.03%
20 kHz - 50 kHz:
max.
0.05%
Signal output (short-circuit proof)
Output voltage:
1.5 V into 600 Ω
Internal resistance:
approx. 600 Ω
Amplitude fl atness:
max. ±0.2dB (5 Hz to 50 kHz)
Attenuation:
min. 60 dB
2 fi xed attenuators:
each 20 dB ± 0.2 dB
variable control:
0 dB to 20 dB
Amplitude stability:
0.12% (4 hrs.)
S p e c i f i c a t i o n s
TECHNISCHE DATEN
Referenztemperatur: 23 °C ±2 °C
TECHNISCHE DATEN
Referenztemperatur: 23 °C ±2 °C
SPECIFICATIONS
Valid at 23 degrees C after a 30 minute warm-up period
Included in delivery:
Low-Distortion Sine Wave Generator HM8037, Operating manual
Optional accessories:
HZ33/34 BNC Test Cable; HZ22 50 Ohm feed-through
termination; HZ10 Silicone test leads
