HAMAR LASER STEALTH Series, Общее руководство по обучению

Страница: 19 / 113

15
Using the Control Panel
Figure 6 shows the control panel for the L-743 and L-733
lasers, including the locations of:
•
The battery pack/AC adapter connection
•
The power switches and POWER ON indicator for the
laser
•
The power switches for the individual scanners
•
The light for the precision level vials
Note: As of January 1, 2014, the level light switch has
been modified. The level light now stays on permanently to
increase stability and allow the laser to warm up faster.
•
The rotation speed buttons. These controls slow the
scanner spin until you can see the laser beam pass over the
target (the farther away the target is located, the slower the
turret must spin). Select SLOW , MEDIUM , or FAST .
Figure 7 shows control panels for the L-742 and L-732 lasers,
both the “Wall-Wall” configuration with two vertical laser
planes, and the “Wall-Ceiling” configuration, with one
vertical laser plane and one horizontal laser plane. Also
shown is the front panel for the L-730/L-740.
Figure 7 –
Laser Control Panels for the L-742, L-732 and L-730/L-740 Lasers. On the left is the
“Wall-Wall”
configuration, or two vertical
laser planes. In the center is the “Ceiling-Wall” configuration, or one vertical plane and one horizontal plane.
Figure 6 -- Laser Control Panel—L-743 and L-733 Lasers