33
Manual configuration wired (LAN) – DHCP enable
•
Select the option
Wired.
•
Select the option
DHCP enable.
•
The connection is now established. No further setting
adjustments are required.
Manual configuration wired (LAN) – DHCP disable
•
Select the option
Wired.
•
Select the option
DHCP disable.
•
Enter the necessary network information, such as the
IP address, subnet mask, gateway address and DNS
(primary and secondary). Find this information in the
web interface of your router or access point, or ask your
network administrator. Once all the information has been
entered correctly, confirm to proceed. The radio now
attempts to establish the connection.
Manual configuration wireless (WLAN) –
DHCP enable
•
Select the option
Wireless.
•
Select the option
DHCP enable.
•
In the input screen, enter the whole SSID
(network name) and then confirm with
OK.
•
Now choose the security standard used by the
network. This can be found in the configuration
options of your router or access point.
•
Depending on the encryption used, you may
need to enter the network key before the
connection is established.
Manual configuration wireless (WLAN) –
DHCP disable
The method described here assumes the DHCP server
is active (
manual wireless configuration (WLAN) –
DHCP enable
). However, the network information
such as IP address, subnet mask, gateway address,
and DNS (primary and secondary) must still be
entered.Find this information in the web interface
of your router or access point, or ask your network
administrator. Once all the information has been
entered correctly, confirm to proceed. The radio
now attempts to establish the connection.
16.2.5 View settings
Here you can find all the most important information
about all network connections currently used or configured
on the radio, such as: MAC address, WLAN region, DHCP
active/ disabled, SSID, IP address, subnet mask, gateway
address, DNS (primary and secondary), etc.
[ ]
System settings
Network
View settings
