28
13.2 Automatic Bluetooth connection (after
successful pairing)
•
Terminal devices already paired with the radio are
automatically saved on the radio.
Note – Connection impaired
After the radio and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the
following:
•
Check the Bluetooth settings of your terminal device
to see whether
DIR3600MBT
is connected. If not,
repeat the steps listed under Bluetooth pairing.
•
Check whether your terminal device and the radio
are less than 10 metres apart. If not, move them
closer togehter.
•
Check whether obstacles are impairing the range.
If so, move the devices closer together.
13.3 Terminate Bluetooth connection
[ ]
Main menu
Terminate connection
•
Then select the
YES
button by turning [
ENTER/
NAVIGATE
], and confirm termination of the Bluetooth
connection by pressing [
ENTER/NAVIGATE
].
14. Sleep
The radio has a sleep function, after a defined time the
radio switches to standby mode.
•
Repeatedly press [
SLEEP
] on the remote control to set
the desired time interval (Sleep OFF/15/30/45/60/90/120
minutes).
•
Alternatively, set the time interval from the main menu
using [
ENTER/NAVIGATE
]:
[ ]
Main menu
Sleep
•
After the defined time the radio switches to standby
mode.
•
Press [
VOLUME/POWER
], to turn the radio back on.
•
If a time interval is already activated, you can change or
disable it at any time by again pressing [
SLEEP
] on the
remote control.
Note
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in Normal operation.
16.9. Backlight.
