Halton Capture Jet KVE-WW, Руководство оператора

Страница: 22 / 30

22
Capture Jet
®
with Water Wash Operation & Maintenance Manual
OM-0
06/1
120
16/re
v2/EN
Water Wash Setup
The number of wash cycles equals the number of separate Water Wash Hoods (and Duct Sumps, if installed) on the
Control Panel. One hood is one wash cycle, two hoods is two wash cycles, two hoods and one duct sump is three wash
cycles, etc. Delay before 1st wash starts is the time set after the exhaust fan is turned off before the first wash cycle
starts. All wash cycles will complete, one after the other, until all hoods and/or duct sumps have been washed. The wash
and rinse times are entered in seconds; one minute is sixty seconds and should be entered as 60 in the “wash time” box.
Two minutes is 120 seconds and should be entered as 120. The example below depicts a three minute wash time and
a one minute rinse time with a one minute delay after the fan turns off before the first wash cycle starts. There is a one
minute soak period between wash and rinse periods of the wash cycle.