HAKO Scrubmaster B400 R, Руководство по эксплуатации

Страница: 98 / 170

98
Scrubmaster B400 R (7190)
Operation
Service
code
Fault Cause Remedy
1.5.5.3 High-pressure
cleaner switches off Overheating due to
excessively long use Let the high-pressure
cleaner cool down for
40 min, then restart it
No water supply Switch on the water
supply
2.2.5.1/
2.2.6.1/
2.2.6.2
Sweeping roller stops Foreign particles block the
brush
Inspect the sweeping
roller for foreign parti-
cles and remove them
if necessary
2.3.5.1/
2.3.6.1/
Side brooms stop Foreign particle blocks the
side brooms
Inspect the side
brooms for foreign par-
ticles and remove them
if necessary
3.1.6.E Cleaning function no
longer possible
Electrical defects Notify Hako service
workshop
3.2.6.5/
3.2.6.6
Service code indica-
tor when turning on
the machine
Low capacity of the inter-
nal back-up battery of the
machine control or
discharged
Notify Hako service
workshop. Machine
can still be used.
3.3.1.1 Service interval
expired
See maintenance plan
3.4.1.1 Speed control Driving direction selection
not recognised or
implausible
Machine OFF/ON
3.4.1.2/
3.4.1.4
Driving not possible Error in the drive control Machine OFF/ON, or
notify Hako service
workshop if necessary
3.4.5.1/
3.4.5.2
Cleaning function
switches off
Drive wheel becomes slug-
gish due to foreign particles
Remove foreign
particles
Drive motor overheats Let the engine cool
down
3.6.6.4 Driving and cleaning
not possible
Seat permanently loaded Relieve seat