HAKO Scrubmaster B400 R, Руководство по эксплуатации

Страница: 88 / 170

88
Scrubmaster B400 R (7190)
Operation
3.4.4 Handling and braking the vehicle
Observe the following points when driving:
• Adapt the driving speed to the ambient conditions, the local conditions and
the load condition of the machine.
• Driving speed and braking of the machine are controlled via the accelerator
pedal.
• The engine brake is automatically applied when the accelerator pedal is
released. This also applies when ascending or descending.
• Stop the machine: Release the accelerator pedal. Press the brake button
for maximum deceleration.
• When the machine is at standstill, the parking brake is activated automati-
cally. It is no longer possible to push the machine.
Overload protection
In case of an overload, e.g. excessively steep slopes, the drive motor is
switched off after a certain period of time.
• Let the machine cool down for approx. 15 minutes.
• Restart the machine.
Danger
• Danger of tilting over when driving on excessively steep slopes
Transport on slopes of up to 10 % (standard drive) or 18 % (X-AC
drive) must only take place for a limited period of time and with
special caution.
• Drive slowly on wet surfaces, particularly in bends, due to the risk
of skidding.
• When driving uphill, downhill or across slopes, avoid sudden turns
and drive slowly into the bend.
Note
Set the key switch to ‘0’ to immediately disable all the functions.