HAKO Scrubmaster B400 R Скачать руководство пользователя страница 94

Страница: 94 / 170

Scrubmaster B400 R (7190)

Operation

3.4.7

Check list: After cleaning

Warning

Turn off the machine and remove the key when leaving the

machine to prevent unauthorised use.

After use, park the machine in a dry, indoor location with the

working units raised.

Attention

Do not use a strong water jet, a high-pressure cleaner or steam

jet to clean the machine.

Environmental danger

Observe the applicable laws and local regulations when disposing of
detergents.

Description

Section

1 Drive to a suitable maintenance location.
2 Clean the plate filter (B400 RM/RH only).

5.10.2

3 Empty the dirt hopper (B400 RM/RH only).

5.7

4 Turn the machine off and remove the key.
5 Empty and clean the waste water tank.

5.4.1

5.4.2

6 Check the fresh water filter and clean if necessary.

5.5

7 Check the sealing strips and suction hose.

8 Check the functions and settings.
9 Charge the battery.

5.2.2

10 Clean the machine. If the machine is not used the next day,

the solution tank must be fully emptied.

5.3.2

Содержание Scrubmaster B400 R











































































































































































Результаты поиска

Содержание Scrubmaster B400 R

Отзывы:

Бренды по названию

Популярные бренды

HAKO Scrubmaster B400 R, Руководство по эксплуатации

Результаты поиска

Содержание Scrubmaster B400 R

Отзывы:

Бренды по названию

Популярные бренды