Hakki Pilke XL Conveyor 1, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 7 / 35

7 / 35
Hakki Pilke XL - Conveyor Translated version 4-2021
3. Install the conveyor belt and connect the hoses as shown in Section 3.
4. Lift the conveyor on the base, and connect the bottom section to the base with rods. Lock the rods
with pins, as shown in Section 4.
5. Install debris removal, as shown in Section 5.
•
4 m conveyor: as shown in Section 5.1
•
6 m and 8 m conveyor: as shown in Section 5.2
6. Connect the conveyor to the base lifting device
•
4 m conveyor: as shown in Section 6.1
•
6 m conveyor: as shown in Section 6.2
•
8 m conveyor: as shown in Section 6.3
7. Install the firewood guide plates as shown in Section 7.