Hakki Pilke XL Conveyor 1, Инструкция по сборке, эксплуатации и обслуживанию

Страница: 30 / 35

30 / 35
Hakki Pilke XL - Conveyor Translated version 4-2021
2.8. Adjusting the debris removal sieve
The debris removal sieve can be adjusted to four different positions by changing the screws in Figure 8a
(both sides) to different holes. The angle of the debris removal plate can be changed with the chain links.
Figure 8a.
2.9. After use
5. After you have finished making firewood, stop the out-feed conveyor and remove the firewood from
the conveyor.
6. Ensure that the machine has not been damaged.
7. Ensure that the machine can be moved safely off the processed firewood.
8. Clean the machine.
If you will not be using the firewood processor for a while, do the following:
9. Store the machine according to the instructions in Section 2.13.