;9
Manging indoor unit
Fdjust the screw cap /lower0 position3
and keep the distance between
washer /lower0 and the ceiling is Mmm3
as the tableA
4?5 Nmrs`kk sgd rtrodmchmf onkd
beam
Xo fix with built4in parts3 foundation blots3 etc5
FG7@9{FG8=9
FG8?9{FG9;9
8:<
8<7
FG:79{FG;?9
8<7
M/mm0
Kix the unit with Q87 suspending pole /; pieces3prepared on field0 as the showed
dimension in the figure5 Jxecute the proper installation due to the different room
structure and keep horizontal with th gradienter5
Xo bear the unit3 in the place with existing ceiling3 use the foundation boltB while in
the place with new bulit ceiling3use the built4in bolt3 embedded bolt or other parts
supplied on field5Gefore installation3 adjust the distance to the ceiling5
Sriginal concrete slab
Yse hole4in hinge3 hole4in plunger or hole4in bolt5
/pipe type suspension foundation pole0
/guiding type embedded part0
/knife type embedded part0
Rew concrete slab
square wood
suspending
pole
reinforced
concrete
foundation bolt
Wteel reinforcement structure
Yse angle steel or new supporting angle steel directly5
suspending bolt
suspending pole
supporting angle steel
screw cap /upper0
washer /upper0
suspension bolt
suspending pole
washer /lower0
screw cap /lower0
ceiling
model
4@5
Nmcnnq tmhs hmrs`kk`shnm
G5 Heiling opening hole dimension3 refer to the figure on Tage <;5
J5 Kasten the nut up on the washer5
Nm b`rd ne mn bdhkhmf
F5 Nnstall unit temporarily
Tut suspending bracket on the suspending bolt to hang the unit up5 Ge sure to use nut and washer at
both end of the breaket to secure firmly5
Ffter installation on the ceiling
H5 Fdjust unit to its right position
I5 Hheck if the unit is horizontal5
Xhe unit is with built4in water pump and float switch3check if the four corners of the unit are horizontal
with the gradienter or the TZH tube with water5 /Nf unit is tilting against the direction of water drainage3
float switch will be abnormal and cause water drop05
Содержание MRV II AV08NMVERA
Страница 112: ...112 5 Wiring connection among units ...