GB
10- Installation
39
10.5 Fresh water connection
CAUTION!
The drain hose should not be submerged in water and should be securely xed and
leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less
than 80 cm, the appliance will continuously drain while being lled (self-siphoning).
Drain hose is not to be extended. If necessary contact Aftersales service.
Make sure that the gaskets are inserted.
1.
Connect the water inlet hose with the angled end
to the appliance (Fig. 10.5-1). Tighten the screw
joint by hand.
2.
The other end connect to a water tap
(Fig. 10.5-2).
WARNING!
dry and leack free!
Take care these parts are never to be crushed, kinked, or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard.
Note: Tub Clean
-
nance run programme “Tub Clean” with no load and small amount of detergent or with
special machine cleaner to remove possibly corruptive residues.
10.6 Electrical Connection
Before each connection check if:
power supply, socket and fusing are appropriate to
the rating plate.
the power socket is earthed and no multi-plug or
extension.
the power plug and socket strictly match.
10.5-1
10.5-2
10.6
Содержание HWD120-B1558
Страница 1: ...User manual Washing machine GB User manual Washer dryer HWD120 B1558 ...
Страница 43: ...GB 43 ...
Страница 44: ...0020507767V ...