Haier HWD120-B1558, Руководство пользователя

Страница: 27 / 44

7.10.2.1 Selecting a time delay – End time delay
Use this function to start the programme with a delay.
1.
Set a programme and select required functions.
2. Slide or touch within the option cube to set up
time delay in steps of 1 hour from OFF-24h (Fig.
7.10.2.1)
3. Touch
▲
symbol to start the programme; time
countdown begins.
7.10.2.1
Note: Time delay
End time must always be longer than programme cycle time. Otherwise operation
starts immediately, although the chosen end time cannot be reached.
When using liquid detergent, it is not recommended to activate the end time delay.
Note: Drying
Do not overload. The combination of washing and drying cycle only allows a maxi-
mum load of 4 kg , depending on the programme (see programme table).
If you want to wash the maximum load, you must interrupt the combined cycle at the end
of the wash programme and you must remove the surplus of load for joined drying cycle.
7.10.2.2 Drying
There are two possibilities to get dry laundry for the
lower drum:
7.10.2.2.1 Set programme Dry
1. Set programme “Dry”
2. Slide or touch within the option cube to set up
drying time in steps of 30 minutes from OFF-120
minutes (Fig. 7.10.2.2.1). Select AUTO for intelli-
gent drying. The dry programme stops when laun-
dry is dry.
3. Touch
▲
symbol to start the drying programme.
Note: Cool down cycle for drying cycle
The last part of the drying cycle occurs without heat to ensure the garments remain at
a temperature which does not damage them.
7.10.2.2.2 Combine a drying cycle with a washing cycle
Use function
“Dry” to add a drying cycle at the end of the washing programme for most
of the programmes for the lower drum (refer to PROGRAMMES). This allows washing and
drying without interruption.
1.
Set a programme and select required functions.
2. Set a drying time like it is described in section above.
3. Touch the
▲
symbol to start the combined washing/drying programme.
7.10.2.2.1
GB
7- Daily use
27