Haier HDBL865ATS, Руководство по установке

Страница: 17 / 36

15
Option 1 – (Garbage Disposal - With Air Gap):
1. Remove the garbage disposal knockout plug. Cut end of drain hose if needed (do
not cut ribbed section).
2. Attach drain hose to air gap with screw-type clamp. If the drain hose was cut, use
a 11/2” to 2” (3.8 to 5 cm) screw-type clamp*.
3. Use a rubber hose connector* with spring or screw type clamps* to connect air
gap to garbage disposal inlet.
This connection must be before the drain trap and at least 20” (50.8 cm) above the
floor where dishwasher will be installed.
a
b
f
c
d
e
g
h
a
Drain Hose - Cut Here if
Needed
b
Screw-Type Clamps
c
Air Gap
d
Screw-Type Clamp
e
Drain Hose
f
Rubber Hose Connector
g
Garbage Disposal Inlet
h
Drain Trap
*Parts available from local plumbing supply store.
Option 2 – (No Garbage Disposal- With Air Gap):
1. Cut end of drain hose if needed (do not cut ribbed section).
2. Attach drain hose to air gap with large spring-type clamp. If the drain hose was
cut, use a 11/2” to 2” (3.8 to 5 cm) screw-type clamp*.
3. Use a rubber hose connector* with spring or screw type clamps* to connect air
gap to garbage disposal inlet.
This connection must be before the drain trap and at least 20” (50.8 cm) above the
floor where dishwasher will be installed.
a
b
f
c
d
e
g
h
a
Drain Hose - Cut Here if
Needed
b
Screw-Type Clamps
c
Air Gap
d
Screw-Type Clamp
e
Drain Hose
f
Rubber Hose Connector
g
Waste Tee
h
Drain Trap
*Parts available from local plumbing supply store.