Haier HDBL865ATS, Руководство по установке

Страница: 28 / 36

26
STEP 13 - CONNECT TO WATER SUPPLY
Compression fittings:
•
Slide nut onto copper tubing about 1” (2.5 cm).
•
Slide ferrule onto the tubing. Do not position ferrule on the end of the
tubing.
•
Put the tubing into the elbow as far as it will go.
•
Slide the nut and ferrule forward and start the nut onto the elbow threads. Be
gentle when handling and positioning the copper tubing, it bends and kinks
easily.
a
c
b
a
Elbow
b
Ferrule
c
Compression
Fitting Nut
1. Route the water supply line so that it does not touch the dishwasher base,
frame, or motor to minimize the noise caused by vibration when using the
dishwasher.
2. With copper tubing pushed into elbow as far as it will go, use a wrench and
tighten compression fitting nut to elbow on water inlet valve. Do not use thread
seal tape with compression fittings.
3. Place paper towel under elbow. Turn on water supply and check for leaks.