16
Option 3 – (Garbage Disposal - No Air Gap):
1. Remove the garbage disposal knockout plug. Cut end of drain hose if needed (do
not cut ribbed section).
2. Attach drain hose to garbage disposal inlet with screw-type clamp.
3. Use a rubber hose connector* with screw-type clamps* to connect garbage
disposal inlet.
This connection must be before the drain trap and at least 20” (50.8 cm) above
the floor where dishwasher will be installed. It is recommended that the drain hose
be looped up and securely fastened to the underside of the counter. “See “Drain
Requirements.”
b
a
c
d
a
Drain Hose
b
Screw-Type Clamp
c
Garbage Disposal Inlet
d
Drain Trap
* Parts available from local plumbing supply store.
Option 4 – (No Garbage Disposal - No Air Gap):
1. Cut end of drain hose if needed (do not cut ribbed section).
2. Attach drain hose to waste tee with 11/2” to 2” (3.8 to 5 cm) screw-type clamp*.
This connection must be before the drain trap and at least 20” (50.8 cm) above
the floor where dishwasher will be installed. It is recommended that the drain hose
be looped up and securely fastened to the underside of the counter. See “Drain
Requirements.”
a
b
c
d
e
a
Drain Hose - Cut Here
if Needed
b
Screw-Type Clamps
c
Drain Hose
d
Drain Trap
e
Waste Tee
*Parts available from local plumbing supply store.
Содержание HDBL865ATS
Страница 1: ...24 Built In Dishwasher Installation Instructions HDBL865ATS Part 00XXXXXXXXX...
Страница 2: ......
Страница 35: ......