HAI OMNI IIe, Руководство по установке, Страница: 42 / 74

Page 36
A1 OK TO ARM 17 Area 1 OK To Arm
A1 ARMED 18 Area 1 Armed
A1 PRE-ALM SNDR 19 Area 1 Pre-Alarm Sounder
A1 INT SNDR 20 Area 1 Interior Sounder
A1 INT BURG SNDR 21 Area 1 Interior Burglary Sounder
A1 INT FIRE SNDR 22 Area 1 Interior Fire Sounder (3 pulse temporal pattern)
A1 EXT SNDR 23 Area 1 Exterior Sounder
A1 EXT BURG SNDR 24 Area 1 Exterior Burglary Sounder
A1 EXT FIRE SNDR 25 Area 1 Exterior Fire Sounder (3 pulse temporal pattern)
A1 BURG COMM 26 Area 1 Burglary Communicator
A1 FIRE COMM 27 Area 1 Fire Communicator
A1 AUX COMM 28 Area 1 Auxiliary Communicator
A1 SWITCHED POWER 29 Area 1 Switched Power Output
The first group of outputs is global. The sounder and communicator outputs will be activated for an alarm in any area. The
remaining types are area specific. Area specific sounder and communicator types will only be activated for alarms in that area.
The Setup Control items are:
OUTPUT 1 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 2 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 3 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 4 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 5 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 6 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 7 TYPE: 0
GENERAL PURPOSE #=CHNG
OUTPUT 8 TYPE: 0
GENERAL PURPOSE #=CHNG
INTERIOR HORN: 4
INT SNDR #=CHNG
EXTERIOR HORN: 7
EXT SNDR #=CHNG
↑
For output types, the current setting is shown on the bottom line. Press the ' # ' key to select a new type from a list of types. The
display shows:
SELECT TYPE: 6
INT SNDR
Use the Up and Down arrow keys to scroll through the list, or select the appropriate output type number. Then press ' # ' to enter
the new type.
If the Interior Horn is configured as a "General Purpose" output, Unit Number 73 is used to control the output. If the Exterior
Horn is configured as a "General Purpose" output, Unit Number 74 is used to control the output. In this configuration, Unit
Numbers 73 and 74 should not be used as "Flags".