32
A
Asssse
em
mb
blly
y a
an
nd
d P
Pa
arrttss
93524 Barbed Drain End Cap Assembly:
The Barbed Drain End Cap (2) seals the left opening on the
Main Valve Body. The opening is sealed with an O-ring (1) used as axial or “face” seal. The O-ring sits in a groove
in the End Cap. This groove must be free of defects such as pits or scratches and also free of debris. When
assembling the End Cap to the Valve Body, care should be taken to make sure that the O-ring stays in the groove
in the End Cap. If misaligned, the O-ring can become pinched and leak.
B
Ba
arrb
be
ed
d D
Drra
aiin
n E
En
nd
d C
Ca
ap
p A
Asssse
em
mb
blly
y
PART#
DESCRIPTION
QUANTITY
1
93808
O-Ring
1
2
93231-2.0
Barbed Drain End Cap
1
93524
Entire Assembly (all of the above parts)
Figure 33: Barbed Drain End Cap Assembly
