Hagstrom KE-USB36, Руководство пользователя

Страница: 9 / 20

Configuring the KE-USB36
The KE-USB36 is supplied with a Windows utility program which
allows quick and easy setup of the inputs on the unit. Run the
KEUSB36.EXE utility program to start the configuration program.
The menu for the program appears as shown below.
The keystroke definitions for each input are shown in the key
definition box on the screen. The key definition box has the words
“Not Used” when the program initially starts. When inputs are
defined, the key definition box will then display the label for the
key to which that particular input is assigned.
The scroll bar may be used to access the definitions for all 36
inputs of the KE-USB36. Information pertaining to an input’s
keystroke definition is shown on each horizontal row.
To define a keystroke for an input, simply move to the line that
corresponds to the input number you wish to program, and select
the definition box to the right of the input number. Once selected,
an image of a standard keyboard is shown. Move your cursor to
the key which you want that particular input to emulate, and select
that key. The key you have selected will now appear in the key
Once the configuration has been created, it is recommended
that the configuration be saved to disk. The program provides an
option for saving the configuration as a custom disk file, so it may
be recalled at a later time for loading or modification.
To save the configuration to disk, select
File
, then
Save As
, and
specify a file name. Configurations saved at a prior time may be
recalled by using the
Open
selection and choosing a file from the
selection list.
To save the configuration to the KE-USB36, select
File
, then
Write to KEUSB36
. Be sure that the KE-USB36 is connected to the
computer prior to this step. Once loaded, the new configuration
will take effect on the KE-USB36.
The configuration is stored on the KE-USB36 in non-volatile
memory. Once a configuration is loaded into the unit, it will
remain set (even during power off) until changed by the user.
To retrieve an existing configuration from the KE-USB36, select
File
, then
Read from KE-USB36
. Be sure that the KE-USB36 is
connected to the computer prior to this step. Once loaded, the
9 12