background image

Warranty

HAGSTROM  ELECTRONICS,  INC.

  warrants  this 

product  against  defects  in  material  or  workmanship  for  a 
period of ONE YEAR from the original purchase date. We will 
repair or replace (at our option) the returned defective unit 
at no charge during this warranty period.

No  responsibility  is  assumed  for  any  special,  incidental, 
or  consequential  damage  resulting  from  the  use  of  or 
inability  to  use  this  product.  In  no  case  is 

HAGSTROM 

ELECTRONICS, INC.

 to be liable for any amount which 

exceeds  the  purchase  price  of  the  unit,  regardless  of  the 
claim.

No  other  warranty,  written  or  verbal,  is  authorized.  This 
warranty is applicable only to units sold in the United States. 
Units sold outside the United States are covered by a similar 
warranty.

Depending on the state in which you live, you may have additional rights.

Great care has been taken during the assembly, testing, and burn-in of 
your KE-USB36 to ensure its performance. If you have any questions, 
please send us an email or give us a call. Support is available Monday 
through Friday, 8:00 am to 5:00 pm (EST).

  

customer service email

:   

[email protected]

      Call Toll Free 

888-690-9080

, or 

(540) 465-4677

NOTICE

 The KE-USB36 product is designed to be used by technically 

oriented computer users. When the KE-USB36 is in use, your computer’s 
signals  and  voltages  are  present  on  the  unit.  Prudent  handling  and 
packaging is necessary to prevent damage to your computer.

Your  keyboard  encoder  is  designed  for  OEM  use,  and  is  not  FCC  part  15  approved.  Because 
the packaging and use of the product will directly affect the characteristics of the unit, it is the 
responsibility of the purchaser to obtain final approval of their application, if required.

Thank you for purchasing the 

HAGSTROM ELECTRONICS, INC.

 

KE-USB36. This product is configurable 

in a variety of ways in order to meet your 

specific requirements. Please take a few 

minutes to read this manual before using 

your KE-USB36.

NOTICE:

  The  KE-USB36  product  is  designed  for  use  by 

technically oriented computer users. When the KE-USB36 is in 
use, your Computer’s signals and voltages are present on the 
unit.  Prudent  handling  and  packaging  is  necessary  to  prevent 
damage to your computer. 

Great  care  has  been  taken  during  the  assembly,  testing, 
and burn-in of your KE-USB36 to ensure its performance. If 
you have any questions, help is available Monday through 
Friday, 8:00 am to 5:00 pm (EST). 

Toll Free 888-690-9080, or (540) 465-4677.

Your  Keyboard  Encoder  is  designed  for  OEM  use,  and  is  not 
FCC part 15 approved. Because the packaging and use of the 
product will directly affect the characteristics of the unit, it is the 
responsibility of the purchaser to obtain final approval of their 
application, if required.

Содержание KE-USB36





















Отзывы: