3-2
SECTION 3 –
OPERATING YOUR NTB
NOTE: The machine’s drive state cannot be
changed unless the Hydrostatic Drive
Control Handle is in the NEUTRAL
position.
4. Press and hold the Transom Switch
(located on the Hydrostatic Drive Con-
trol Handle) in the UP position to raise
the NTB up off ground.
NOTE: Ensure coulters clear the ground.
5. Unfold each main fold section by press-
ing and holding the corresponding Left
and Right Boom/NTB Switches (located
on the Hydrostatic Drive Control Han-
dle) in the OUT position.
NOTE: 60’ HsTB - Unfold main fold
sections by pressing and holding the
Left and Right Boom/NTB Switches
in the DOWN position.
Field/Road Button
(Located on the Machine Display
Home Page)
Transom Switch - UP
(Located on the Hydrostatic
Drive Control Handle - Version 1)
-Typical View
Transom Switch - UP
(Located on the Hydrostatic Drive
Control Handle - Version 2)
-Typical View
