SECTION 3 –
OPERATING YOUR NTB
3-3
Outer Fold Extensions
(40’ NTB/60’ HsTB only)
6. Unfold each outer fold extension by
pressing and holding the Boom/NTB
Extension Switch (located on the side
console) in the UP (Out) position.
NOTE: Both left and right outer fold
extensions will unfold simultaneously
when this switch is pressed.
7. If necessary, retract (raise) the parking
stands (60’ HsTB only).
Refer to “Transporting” provided in
Section 5 - Miscellaneous
elsewhere in
this manual for further information.
Fold Nitrogen Toolbar
(to storage position)
1. Ensure the Hydrostatic Drive Control
Handle is in the NEUTRAL position.
2. Ensure the machine’s drive state is in
FIELD mode.
3. Press the Float Button (located on the
Machine Display Auxiliary Controls
Page) and turn Float operation OFF.
• Left Boom/NTB UP
• Left
Boom/
NTB OUT
• Left Boom/NTB IN
• Left Boom/
NTB DOWN
• Right Boom/NTB UP
• Right
Boom/
NTB IN
• Right Boom/
NTB OUT
• Right
Boom/
NTB
DOWN
Left and Right Boom/NTB Switches
(Located on the Hydrostatic Drive
Control Handle - Version 1)
-Typical View
Left and Right Boom/NTB Switches
(Located on the Hydrostatic Drive
Control Handle - Version 2)
-Typical View
• Right
Boom/
NTB
OUT
• Right
Boom/
NTB
DOWN
• Right
Boom/
NTB
UP
• Right
Boom/
NTB IN
• Left
Boom/
NTB UP
• Left
Boom/
NTB OUT
• Left
Boom/
NTB IN
• Left Boom/
NTB
DOWN
Boom/NTB Extension Switch
(Located on the side console)
-Typical View
Float Button
(Located on the Machine Display
Auxiliary Controls Page)
