3-10
SECTION 3 –
OPERATING YOUR NTB
4. Start the engine.
5. Press the Field/Road Button (located on
the Machine Display Home Page) and
change the machine’s drive state to
FIELD mode.
NOTE: The drive state of the machine
cannot be changed unless the
Hydrostatic Drive Control Handle is
in the NEUTRAL position.
NOTE: The selected drive state will
illuminate.
6. Press the Main Tank Valve Switch
(located on the side console) in the UP
(Open) position.
If desired, activate the Agitation Valve
Switch (located on the side console).
Press and hold switch UP to increase
flow, or DOWN to decrease flow.
NOTE: Main Tank Valve status (OPEN or
CLOSED) and Agitation Valve
pressure are displayed on the
Machine Display Home Page - Field
Mode. Agitation Valve pressure is
also displayed when in Rode Mode.
7. Press the Solution Pump Switch (located
on the side console) in the UP (On) posi-
tion.
Field/Road Button
(Located on the Machine Display
Home Page)
Main Tank and Agitation Valve Switches
(Located on the side console)
-Typical View
• Main Tank
Valve Switch
• Agitation
Valve Switch
NOTICE
Do not allow the Solution Pump to run
continuously while the Boom Solution
Valve Switches are off. Failure to comply
may generate overheating, causing
severe pump damage and will void the
warranty.
• Main Tank
Valve Status
• Agitation
Valve
Pressure
Main Tank Valve Status and
Agitation Valve Pressure Indicators
(Located on the Machine Display
Home Page - Field Mode)
