Information for electricians
Manual commissioning/device setting
1
Switch on the most powerful hotplate to the highest level.
2
Press the operation button (2).
The sensor unit confirms the identification of the cooker type with acoustic and optical signals.
3
Switch off hotplate.
Manual calibration in option 2 is completed.
The cookguard ends the automatic setting mode.
With an induction cooker, a suitable pot must be used for commissioning.
Setting mode 4: Setting and testing potential-free contacts
Additional information about the two potential-free outputs AUX1 and AUX2 can be found
in Chapter 4.3, "Potential-free contacts (optional)" .
Setting AUX outputs:
Setting mode 4 is called up. The status LED (5) flashes white (normal setting) or red (inverted set-
ting).
l
Press operation button 1 (1) for five seconds.
Changing between the two operation modes of the AUX outputs:
Normal AUX mode: The status LED (5) flashes white.
Inverted AUX mode: The status LED (5) flashes red.
Testing AUX outputs:
1
Short press of operation button (1).
AUX1 changes between ON and OFF.
2
Short press of operation button (2).
AUX2 changes between ON and OFF.
Exiting setting mode 4:
l
Press the OK button (3).
The setting mode is completed.
20