Manual RDS B-in-Radio 12V
Fitting to
833.02.820
Version (modifications reseverd)
17.08.2015
Seite 3 von 15
8. Preparatory work before installation
Install the power cable for 12 VAC and the RCA cable (for
the music center AUX) in accordance with installation
guidelines, and your desired port scenario.
Note:
To get a proper installation please pull out some cable
length out of the wall and flush mounting box to connect
the terminals without obstruction. Draw back the cable in
the wall or the flush mounting box again before fixing the
device with the screw. Have enough space available in your
instructive tube and your flush mounting box.
Note on the structure of the RDS B-in radio
The device consists of three parts:
1 - Control panel (pluggable)
2 - Housing with mounting plate (assembly unit)
Attention
Switch off 12V power supply when unplug the control unit.
9. Installing the device
9.1. General
Mount the flush box at the decided location.
Note:
The unit has a mounting depth of 37 mm. For flush mounting box has a minimum depth of 40 mm
requirement for a professional installation. The flush-mounting box is not supplied.
Disconnect the cables necessary for connection of something out of the box and plug in the device.
Plug the control tower on the mounting unit.
9.2. Connections
9.2.1. Connections in general
The BTR 55 is applicable for Haefele cabling system.
Note
Speaker connection: green
Power connection: yellow
Accessory
: Loox Power Supply / 12 V DC
