#151
• Made from Fome-Cor
®
plastic, laminated with heavy
duty aluminum foil
• Mounts on mast, rigging, spreader, outriggers, etc.
1.
With scored line facing you, fold discs A and C
toward you to a 90° angle.
2.
Holding disk B horizontal, slide disc A into
disc B through centered slot, engaging slots in
disc B.
3.
Repeat on other side of disc B, using disk C.
4.
Important: After assembling radar reflector,
securely lash two corners using 1/16" (1.6 mm)
synthetic line.
Unit can be disassembled and stowed flat.
ASSEMBLY INSTRUCTIONS
Optional Use of Windvane Tail
To counteract rotation, a double strand of synthetic
line 1/8 to 3/16" (3.2 to
4.8 mm) tied to a lower
corner hole forms a
windvane tail as shown.
Tail becomes more
effective as wind
increases.
INSTALLATION INSTRUCTIONS…
See next page.
