Manual RDS B-in-Radio 12V
Fitting to
833.02.820
Version (modifications reseverd)
17.08.2015
Seite 10 von 15
If frequency settings are changed select your
memory setting key with the
„/-“
button
to save configuration settings.
Menu A2 (Autoscan)
Display as shown:
Line 1: Frequency
Line 2: Frequency in MHz
Press button
„“
: Scanstart
“Autoscan” seeks out the first 9 radio stations and
saves them on the buttons 1...9 for station
settings.
If there is no radio station found, the startup
frequency (87,5 MHz) is set.
Menu B (Device time)
Press then the button
„M“
approximately 5
seconds to start this configuration item.
Display as shown:
Line 1: Time
Line 2: HRS : MIN …. Hours:Minutes
Set the time on your current time zone.
Press button
„Volume -“
… + 1 hour
Press button
„“
… + 1 minute
Menu C
To start the configuration mode, press the button
„M“.
Menu C1: ALARM
Display as shown:
Line 1: Alarm
Line 2: On/Off …. Hours: Minutes
Note:
Alarm setting is stored but must be activated
manually when needed.