Manual RDS B-in-Radio 12V
Fitting to
833.02.820
Version (modifications reseverd)
17.08.2015
Seite 12 von 15
Display line 2 switches to „15“.
Confirm your settings by pressing on the ‘
M
’ button.
Now the settings are stored.
You’ll get automatically to the next function menu step.
If you want to leave the configuration menu completely press the ‘
M
’ button again or wait 5 seconds until
the device switches automatically back into operation mode.
Menu D1 (Maximum Voume)
Press the
„Source -“ button
and the
„M“ button
at the same time up to max. 2 sec.
to get to start
this configuration item.
Display as shown:
Line 1: max. 0 dB (max. volume)
Line 2: a: < ... dB (used max. volume)
Configure your „max. volume“ setting.
Press button
„Volume -“
… - 1 dB
Press button
„“
… + 1 dB
Menu D2 (Menu Blocking)
Display as shown:
Line 1: Access
Line 2: free / locked
Press button
„Volume -“
… free (menu enabled)
Press button
„“
… locked (menu
disabled)
Menu D3 (Reset)
Display as shown:
Line 1: Reset
Line 2: Start V+
Press the
„“
button to start “Reset”.
