Manual RDS B-in-Radio 12V
Fitting to
833.02.820
Version (modifications reseverd)
17.08.2015
Seite 6 von 15
9.2.3. Connecting antenna
Connecting antenna cable:
Connect the outer screen at
(-)
and the inner
conductor at
(+)
and screw it firmly with the
screws on the front.
If there is no external antenna cable then slide the
included antenna into the installation pipe and fix
the one end of the cable at Ant(+).
Note:
For best reception, the wire antenna must be
stretched and must not be rolled up!
9.2.4. Connecting external audio source (AUX 2)
Connecting Bluetooth Receivers 12V (Häfele, Type
833.02.821):
Connect the AUX cable (green) of the RDS B-in
radio with the AUX cable (green) of the Bluetooth
Receiver.
Note:
The AUX Line-In is in Mono. So the Line-Out of
the external source has also to be switched to
Mono.
